Getting Started - Black+Decker MCD900BBD Use And Care Manual

GETTING STARTED

This appliance is intended for household use only.
• Remove all packing material, any stickers, and the plastic band around the
power plug.
• Go to www.prodprotect.com/blackanddecker to register your product.
• Wash and dry all removable parts as instructed in CARE AND CLEANING.
After cleaning, see ASSEMBLY section to put the unit together.
• Select a location where the Multicooker is to be used. Place the unit on a
stable, heat resistant surface, free from cloth, liquids and any other flammable
materials. Ensure that the unit has enough space all the way around and above
it to allow heat to flow without damage to cabinets or walls.
• See the recipes starting on page 17.
IMPORTANT INFORMATION ABOUT YOUR MULTICOOKER
• The glass and metal parts of the lid and the cooking pot get hot. When
in use, always use oven mitts or potholders when touching any outer or
inner surface of the appliance.
• To switch back and forth between °F and °C hold the Temp button for
3 seconds.
• If there is a power outage, the Multicooker will turn off. If this is
discovered quickly, continue cooking when the power is restored. If you
are not sure how long the Multicooker has been off, discard the food.
• During first few minutes of use you may notice smoke and a slight odor.
This is caused by oil that may have been used during manufacturing of
the unit and will not impact the performance.
• Always use heatproof plastic, nylon, or wood utensils. Do not cut foods
directly in the cooking pot and do not use metal utensils in this appliance;
both actions could damage the cooking pot surface.
• Unplug the appliance when not in use and always
allow the cooker to completely cool before cleaning.
ASSEMBLY
1. After cleaning and drying the removable parts as
instructed in CARE AND CLEANING, place the
center of the cooking base over the removable
control panel (the cooking pot will guide itself to
the correct resting position). (A)
2. Push removable control panel into the unit
completely. The back of the panel will align with
the pot in the back. (B)
3. Place glass lid onto the cooking pot.
4. The unit is ready to be plugged in and used.
4
A
B