SATA tape
drive signal
connector
SATA tape
cable
8. Install the air baffle (see "Installing the air baffle" on page 112).
9. Install the riser-card assembly, if you removed it to install a SATA drive (see
"Installing the riser-card assembly" on page 155).
10. Install the fan-bracket assembly (see "Installing the fan-bracket assembly" on
page 114).
11. Install the cover (see "Installing the server cover" page 88).
12. Slide the server into the rack.
13. Connect the cables and power cords.
14. Turn on all attached devices and the server.
Chapter 5. Removing and replacing server components
131