Advertisement
9. If not mounting the projector using Christie One Mount, complete the following steps:
a) Attach the lens support bracket assembly to the bottom surface of the projector.
b) Install the two M6x22 hex screws and two M6 washers in the mounting holes of the
projector.
700-GS, 850-GS, and 1075-GS:
630-GS and 635-GS:
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ultra short throw lens installation
9
Advertisement
