Advertisement
9. For 630-GS and 635-GS only, Christie recommends installing the rubber boot.
Christie recommends keeping the boresight extenders in place in case you need to adjust boresight
again.
Removing the ultra short throw lens
A long neck screwdriver is required to release the lens.
1. Loosen the screws that connect the lens bracket to the lens support bracket assembly.
2. Insert the screwdriver into the lens aperture, aligning the screwdriver with the bottom side of
the lens.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ultra short throw lens installation
15
Advertisement
