Advertisement
7. To secure the angle bracket to the lens support bracket, install one M3x8 hex screw and one
M3 washer.
Do not fully tighten the screw.
8. For 630-GS and 635-GS only, install the rubber spacer provided in the installation kit on top of
the default rubber spacer on the lens support bracket.
The additional rubber spacer is not required for 700-GS, 850-GS, and 1075-GS.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ultra short throw lens installation
8
Advertisement
