Advertisement
Orientation
Upright
For DHD630-GS, DWU630-GS, DHD635-GS, DWU635-GS, DHD1075-GS, and DWU1075-GS:
Orientation
Table top
Portrait (right)
Portrait (left)
Ceiling mount
Upright
Installing the ultra short throw lens
Install the ultra short throw lens in the projector after installing the new boresight adapter.
1. Insert the ultra short throw lens into the projector slightly angled to the left so the Top label on
the lens aligns with the Status LED indicator on the projector.
Note the orientation of the lens (1) as illustrated below.
2. To lock the lens, rotate the lens clockwise (2 in the image below).
Turning on the projector
Before turning on the projector, ensure the ultra short throw lens has been installed.
1. Plug the projector into AC power.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Adjustment range (in turns) for boresight screws
A
10 + 3/4
Adjustment range (in turns) for boresight screws
A
3 + 3/4
5 + 1/4
5 + 1/4
7 + 1/4
7 + 1/2
Ultra short throw lens installation
B
8 + 1/4
B
7 + 1/2
4
9 + 1/2
6
7
C
8 + 1/2
C
8 + 1/2
10
4 + 1/2
6
7 + 1/4
12
Advertisement
