Christie 140-133108 Series Instruction Sheet page 4

630-GS and 635-GS:
2. Remove the lens through the front of the projector.
Replacing the boresight adapter
As part of the ultra short throw lens installation, replace the boresight adapter.
1. For 630-GS and 635-GS only, release the lens ring by turning the lens ring counterclockwise.
2. Remove the three screws securing the standard boresight adapter.
Retain the three screws to use with the new ultra short throw lens boresight adapter.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ultra short throw lens installation
4