Christie 140-133108 Series Instruction Sheet page 6

8. Install the connector that you disconnected in step 4 in the new boresight adapter.
Mounting the lens support bracket
To provide additional support for the ultra short throw lens, mount it on a support bracket.
1. Place the ultra short throw lens on a cushioned surface to prevent damaging the lens.
2. Using two M3x8 screws, secure the lens bracket to the ultra short throw lens.
Note the direction of the arrow on the lens bracket.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ultra short throw lens installation
6