Table of Contents
Advertisement
Sensor Cleaning
To ensure proper operation of the sensor it is recommended that the glass viewing window be wiped
clean with glass cleaner at the start of each shift. The exterior of the sensor and mount should be
cleaned weekly. Pay particular attention to the bellows on the z-axis. They must be kept clean.
If the plastic sensing surfaces of the edge detectors need cleaning, you may wipe them with soapy water
or isopropyl alcohol. The edge detectors are small, black cylindrical housings about 3/4 inches in
diameter mounted inside the light shade. Be sure to keep liquid out of the sensitivity adjustment ports.
11/02
Maintenance
4-9
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
