Table of Contents
Advertisement
Installation area of sensor window with ball detents
Sample holder installed
Positive-pressure Air Purge for Sensor Window and Automatic Tile Holder
The air purge assemblies provide positive pressure to blow airborne particulates away from the viewing
port and the moving parts of the tile holder. This option consists of the following components:
• Air fitting in the wall of the sensor enclosure
• Air fitting in the wall of the tile holder enclosure
• Required modifications to the sensor enclosure
• Required modifications to the tile holder enclosure
• Pressure regulator mounted on the sensor for localized air pressure adjustment
• 180° - 220° air purge ring that snaps onto the sensor window
• 40 feet of air line to connect from the sensor window to the air filtration panel near the support unit
• 25 feet of air line to connect from the tile holder to the air filtration panel near the support unit
• Air filtration system.
The required modifications are made to the system when it is built.
1-10
Introduction
11/02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
