Table of Contents
Advertisement
Maintenance
This chapter describes routine maintenance functions to be performed regularly on the SpectraProbe XE
system. Consistent performance is enhanced by a consistent maintenance program.
If it becomes necessary to disconnect the sensor or support unit cables for maintenance, always turn
power to the support unit off before disconnecting cables and turn it back on only after reconnecting all
cables.
System Warm-up
If power to any of the system components has been turned off, it must be restored to all components
before operation can resume.
When restoring power to system components,
1. Restore power to the support unit and computer.
2. Allow one hour for the system to warm up.
3. Initialize the software.
4. Standardize.
5. Begin operation.
11/02
Maintenance
4-1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
