Table of Contents
Advertisement
The standard
edge detectors
Diagonal Edge Detectors
This option places the edge detectors at opposite corners relative to the sensing port. In this
configuration, the sensor can detect fore-and-aft, as well as side-to-side product placement.
Four Movable Edge Detectors
This option provides four external product detectors, two on the front and two on the back of the sensor.
The detectors are movable and may be adjusted to the desired position by sliding them along a slotted
rail.
Motion Alarm (Traversing systems only)
The motion alarm on the traversing system provides a visual and audible indication that the sensor is
either moving or is about to move. The audible alarm, if selected, will sound for a period of time before
the sensor starts to move. The visual alarm, if selected, flashes while the sensor is under automated
control, if the computer is set to move the sensor either continuously or at predetermined intervals. This
provides a safety benefit for operators. The alarm box should be placed in an area that is visible to the
operators and anyone else who might be in the way of the moving sensor.
11/02
Introduction
1-17
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
