Floppy Drives; Ide Drives - Acer AcerAltos 21000 System Manual

4.4.1

Floppy Drives

To configure the first floppy drive (drive A), highlight the Floppy Drive
A parameter. Press
appropriate value.
Possible settings for the Floppy Drive parameters:
[ None
[360 KB,
[1.2 MB,
[720 KB,
[1.44 MB,
[2.88 MB,
Follow the same procedure to configure floppy drive B. Choose
if you do not have a second floppy drive.
4.4.2

IDE Drives

There are two IDE drive option items under the Disk Drives menu.
Select the IDE Primary Channel Master item if you want to configure
an IDE device set as master. Select the IDE Primary Channel Slave
item if you want to configure an IDE device set as slave.
To configure an IDE device designated as master:
1. Select the IDE Primary Channel Master option to display its
menu.
2. Highlight the parameter Type, then press
IDE drive types with their respective values for cylinder, head,
sector, and size.
4-12
or to view the options, then select the
]
5.25-inch]
5.25-inch]
3.5-inch]
3.5-inch]
3.5-inch]
AcerAltos 21000 System Guide
None
or to display the