Power Management Mode - Acer AcerAltos 21000 System Manual

4.5 Power Management
The Power Management menu lets you configure the system power
management features.
The following screen shows the Power Management parameters with
their default settings:
Power Management Mode ................. [Disabled]
IDE Hard Disk Standby Timer ........ [---]
System Sleep Timer ................. [---]
Stop CPU Clock in Sleep State ... [---]
ACPI BIOS ............................. [Disabled]
= Move Highlight Bar,
4.5.1

Power Management Mode

This parameter allows you to reduce power consumption. When this
parameter is set to
system timers.
management feature and all the timers.
IDE Hard Disk Standby Timer
This parameter allows the hard disk to enter standby mode after
inactivity of 1 to 15 minutes, depending on your setting. When you
access the hard disk again, allow 3 to 5 seconds (depending on the
hard disk) for the disk to return to normal speed. Set this parameter
to if your hard disk does not support this function.
OFF
4-16
Power Management
, you can configure the IDE hard disk and
Enabled
Setting to
Disabled
AcerAltos 21000 System Guide
= Change Setting, F1 = Help
deactivates the power
Page 1/1