1.1.3
Preparing the System Unit
Do the following to begin setting up the system:
1.
Unlock the front wheels and move the system to your desired
site.
The system housing design allows for easy transport in spite of
its size. It comes with four wheels that facilitate short-distance
transits. The two front wheels each include a lever to lock the
wheels after you have positioned the system into place.
Front Wheel Lever
2.
After moving, lock the wheels by pressing down the levers.
3.
Connect the system power cable into the power supply modules
on the rear panel. See section 2.5.
Getting Started
Unlock
Lock
Make sure to unlock the wheels when you want
to move the system again.
1-3