Installing And Removing The Termination Board - Acer AcerAltos 21000 System Manual

7. Connect the heatsink cables to the main board. Refer to section
3.1.2 for the location of the thermal and fan connectors.
Refer to the VRM LED guide (section 3.1.5) for
installing VRMs. A VRM LED with green light indicates
that a VRM has to be installed in its socket.
3.1.4 Installing and Removing the Termination
Board
When you are not using all the Slot 2 sockets, you must install a
termination board into each empty slot.
Installing a Termination Board
Follow these steps to install the termination board:
1. Position the termination board over the empty slot.
2. Carefully insert the golden fingers of the termination board into
the slot until the board fits completely.
OO
3. Use the retention mechanism cover to secure the processor by
pressing it down until it locks.
3-10 AcerAltos 21000 System Guide