Acer AcerAltos 21000 System Manual page 110

Onboard Floppy Disk Controller ......[Enabled]
Onboard IDE Primary Channel .........[Enabled]
Onboard PS/2 Mouse (IRQ 12) .........[Enabled]
Onboard USB .........................[Disabled]
Onboard SCSI ........................[Disabled]
Boot from Onboard SCSI Device ....[--------]
Onboard Ethernet Chip ...............[Enabled]
SMBUS Interrupt(IRQ9) ...............[Enabled]
= Move Highlight Bar,
PgDn/PgUp = Move Screen
Serial Port 1
This parameter allows you to enable or disable the serial port 1. The
Base Address and IRQ items are configurable only if this parameter is
enabled.
This function lets you set a logical base address for serial port 1. The
options are:
3F8h
2F8h
3E8h
2E8h
This function lets you assign an interrupt for serial port 1. The options
are IRQ and .
3 4
4-24
Onboard Devices Configuration
= Change Setting, F1 = Help
Base Address
IRQ
AcerAltos 21000 System Guide
Page 2/2