Obtaining The Ip Addresses Of Recording Devices; Configuring The Recording Encoder; Setting The Ip Address - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide

8.1 Obtaining the IP Addresses of Recording Devices

Step 1 Connect a PC to the LAN port on the recording device using a network cable.
Step 2 Install DSSIPViewer in the CD-ROM delivered with the recording device. Start DSSIPViewer.
Select all options under Search Options at the bottom of the displayed window, and click
Search.
The IP addresses of the recording devices on the network are displayed under Device List, as
shown in
Figure 8-1 Obtaining the IP addresses of recording devices
----End

8.2 Configuring the Recording Encoder

8.2.1 Setting the IP Address

Step 1 Log in to the web interface of the recording encoders one by one using the obtained IP addresses.
The default login user name and password are both admin.
Issue 01 (2015-02-12)
NOTE
The LCD on the front panel of a recording device can display the correct IP address only when the device
is connected to a network. If the device is not connected to a network or if an IP address conflict occurs,
the IP address displayed is 0.0.0.0.
Figure 8-1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 (Optional) Local Recording Settings
182