Associating The Telepresence Host With The Recording Server - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Figure 8-18 Telneting to the recording server
Step 2 After >>, run tnrc pwmodify old:"szreach" new:"szreach" newcheck:" szreach".
If <pwmodify>state:1<pwmodify> is returned, the password is changed to szreach
successfully.
----End

8.4.2 Associating the Telepresence Host with the Recording Server

Step 1 Telnet to the telepresence host.
The Telnet login user name and password are both debug.
Step 2 At the main-> prompt, run cm setrecPlaySwitch 1 to enable recording. (To disable recording,
run cm setrecPlaySwitch 0.) Restart the telepresence host.
The following information is displayed:
main-> cm setrecplayswitch ?
Example:
cm SetRecPlaySwitch [x]
x = 0 -- off, 1 -- on
main-> cm setrecplayswitch 1
Set OK!Will really take effect after reboot.
You can use debug cmd "keyctrl reboot yes" to reboot the system.
Step 3 Log in to the web interface of the telepresence host as the superadmin user (password:
Change_Me), right-click Recording System, and choose Settings.
Figure 8-19 Right-clicking Recording System
Step 4 Set recording parameters.
Issue 01 (2015-02-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 (Optional) Local Recording Settings
191