Using The Wizard (Web) - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide

4.2.2 Using the Wizard (Web)

Introduction
Log in to the telepresence host's web interface (the user name is superadmin and the password
is superadmin). Use the wizard if you are using the telepresence host for the first time, as shown
in Figure
Figure 4-13 Telepresence host's login page
Procedure
Step 1 Access the wizard.
Choose Device Control > Wizard, as shown
Figure 4-14 Wizard
Step 2 Configure the left telepresence codec, as shown in
Issue 01 (2015-02-12)
4-13.
NOTE
From the telepresence host's web interface, you can set the external addresses for the telepresence codecs.
From the wizard, set the local IP address, subnet mask, gateway IP address for the telepresence system's
external network, and click Next.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-14.
Figure 4-15 and Table
4 Parameter Configuration
4-8.
56