Saving Camera Parameter Settings - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
----End

7.1.3 Saving Camera Parameter Settings

After all camera parameters are set, do the following to save the parameter settings:
Step 1 Telnet to each telepresence codec.
To telnet to the telepresence codec whose IP address is 10.11.250.61, do the following: Choose
Start > Run. In the Run dialog box, enter telnet 10.11.250.61, and press Enter. On the displayed
window, enter debug for both the login name and the password.
The window shown in the following figure is displayed.
Step 2 To enable the camera to be configured based on the settings saved on the telepresence codecs
when they are started, run mc camera cfgsendswitch 1.
Issue 01 (2015-02-12)
l To set the blue gain (BGain VAL) to 159, run camera setc500CameraParam
bluegain:159 camport:5.
l To set the red gain (RGain VAL) to 209, run camera setc500CameraParam Redgain:
209 camport:5. See the following figure.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Appendix
161