Setting The Wireless Router Ip Address - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide

2.6.5 Setting the Wireless Router IP Address

By default, the NETGEAR wireless router' IP address is 192.168.1.1, and user name and
password for logging into its web interface are admin and password respectively. To restore
the wireless router to its default settings, press and hold the Reset button for at least 10 seconds,
as shown in
Figure 2-22 Network of the TP3106&TP3118s&TP3118's wireless router
Connect the wireless router's LAN port to the network switch. Assign the LAN port an IP address
(such as 172.16.21.64) that is in the same network segment with the telepresence host and
telepresence codecs. Connect the touch panel (default IP address: 172.16.21.65) to the wireless
router through Wi-Fi, then to the telepresence host.
Issue 01 (2015-02-12)
DIP Switch Settings
(Switches 1 to 3 from
Left to Right)
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
Figure 2-22.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
DIP Switch Settings
(Switches 4 to 7 from
Left to Right)
0100
1100
0010
1010
0110
1110
0001
1001
0101
1101
0011
1011
0111
1111
2 Deployment Preparation
Corresponding IP
Address
172.16.21.32
172.16.21.33
172.16.21.34
172.16.21.35
172.16.21.36
172.16.21.37
172.16.21.38
172.16.21.39
172.16.21.40
172.16.21.41
172.16.21.42
172.16.21.43
172.16.21.44
172.16.21.45
25