Red Line Under Chapter Of Hid - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Setting the HD Displays to Be Automatically Turned On After Power-On
After the HD displays are installed, press their power switches to ON.
Setting the Date and Time
Step 1 Press the setup key on the HD display's remote control to access the Set up menu, and scroll to
Present time Setup.
Step 2 Scroll to Day, and press the navigation keys to select the day.
Step 3 Scroll to Present Time of Day, and press the navigation keys to select the time.
----End
Turning Off the NANODRIFI Saver
Step 1 Press the setup key on the HD display's remote control to access the Set up menu.
Step 2 Scroll to Extended life settings, and access Custom setting > NANODRIFI saver.
Step 3 Press and hold the key and select Yes in the prompt page, and select Off and Apply to current
inputs.
----End
Setting the Position and Size for the DVI Video Source
The video signals of the TC310 tri-lens camera are input to the HD displays.
Step 1 Log in to the telepresence host's web interface. Right-click one of the HD displays, and choose
Settings to display the HD display settings page.
Step 2 Access the Picture Position/Size menu. Set the parameters according to the specifications
provided in the following table.
Table 7-7 720p/50Hz video source
Parameter
Horizontal position
Horizontal size
Vertical position
Vertical size
----End

7.12 Red line Under Chapter of HID

This is an error correction function for Android pad, which is normal.
Issue 01 (2015-02-12)
Value
–4
–44
2
–51
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Appendix
Remarks
180