Telepresence Host; Setting The Model Of Telepresence Host - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Figure 4-10 Common Settings

4.2 Telepresence Host

4.2.1 Setting the Model of Telepresence Host

Setting the Model of Telepresence Host
Step 1 Log in to the telepresence host's web interface (the user name is superadmin and the password
is superadmin), right-click Telepresence Host, and select Set Model, as shown in the
4-11.
Issue 01 (2015-02-12)
NOTE
For the center telepresence codec, set the sharing mode to "T.140". For the left and right telepresence
codecs, set the sharing mode to "Other than T.140". Use default values of other parameters.
NOTE
When the recording system is used, you need to telnet to the telepresence host and enable the recording
function. For details, see the Commissioning Guide to the Recording Subsystem of Huawei Telepresence
System.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Parameter Configuration
Figure
54