HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Table 2-6 IP settings
Parameter
Connection type
Local IP address
Subnet mask
Gateway address
Alternate IP address
Alternate subnet mask
DNS server address
Network interface mode
Step 5 In Local IP address and Alternate IP address, respectively enter the external and internal IP
addresses assigned to the telepresence codec (the IP address in the preceding figure is for your
reference only). Select Auto detection for Network interface mode and click Save.
Step 6 Repeat the preceding steps to set the IP addresses of the other two telepresence codecs.
----End
2.6.3 Setting the Telepresence Host IP Addresses
Step 1 Connect a computer directly to the telepresence host. Change the computer's IP address to be in
the same network segment of the telepresence host's external IP address (192.168.1.1), as shown
in
Figure
Issue 01 (2015-02-12)
Value
Static IP
10.11.250.61
255.255.255.0
10.11.56.1
172.16.21.61
255.255.255.0
-
Auto detection
100 Mbps, full duplex
2-14.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Deployment Preparation
Remarks
Fixed value.
In this field, enter the center
telepresence codec's external
IP address.
In this field, enter the center
telepresence codec's external
subnet mask.
In this field, enter the center
telepresence codec's gateway
IP address.
In this field, enter the center
telepresence codec's internal
IP address.
In this field, enter the center
telepresence codec's internal
subnet mask.
-
Fixed value.
Standard value for Huawei
internal network
19