Setting The Telepresence Codec Ip Addresses - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
quit
interface Ethernet 0/0/18
port link-type access
port default vlan 2
quit
interface Ethernet 0/0/19
port link-type access
port default vlan 2
quit
interface Ethernet 0/0/20
port link-type access
port default vlan 2
quit
interface Ethernet 0/0/21
port link-type access
port default vlan 2
quit
interface Ethernet 0/0/22
port link-type access
port default vlan 2
quit
interface Ethernet 0/0/23
port link-type access
port default vlan 2
quit
interface Ethernet 0/0/24
port link-type access
port default vlan 2
quit
quit//Quit the system settings.
save
Y
File name to save.cfg
dis cur
dis vlan 1

2.6.2 Setting the Telepresence Codec IP Addresses

Step 1 Connect a computer directly to one of the telepresence codecs. Change the computer's IP address
to be in the same network segment of the telepresence codec's IP address (192.168.1.1 by
default), as shown in
Figure 2-10 Connect a computer to one of the telepresence codecs
Step 2 Connect the telepresence codec's standard power adapter to a power supply. Set the power switch
on the telepresence codec to ON so that the telepresence codec automatically starts after it is
powered on, as shown in
Issue 01 (2015-02-12)
//Save the settings.
//Confirm the operation.
//Save the file name.
//Query all ports' status.
//Query port 1' status.
Figure 2-10.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-11.
2 Deployment Preparation
17