SaMASZ ALPINA 220 User Manual page 48

Calculation of the front ballast minimum weight, M
❑
or rear TPH:
Calculation of the rear ballast minimum weight, M
❑
TPH:
Calculation of the actual tractor front axle load, T
❑
* If the machine attached to the front TPH (M
weight with ballast to the required minimum front load.
Calculation of the total weight of the tractor and machine unit, M
❑
* If the machine attached to the rear TPH (M
weight with ballast to the required minimum rear load.
Calculation of the actual tractor rear axle load, T
❑
Tire load capacity: specify the double value of the load indicated by the tire manufacturer.
❑
ENTER THE FOREGOING CALCULATION DATA AND THE MANUFACTURER'S SPECIFICATIONS IN THE
TABLE BELOW:
Minimum front or rear
ballast
M or M
Pmin. Tmin.
Total weight
M
C
Front axle load
T
P rzecz.
Rear axle load
T
T rzecz.
The minimum ballast load shall be provided by hitching the machine or additional ballast units on the tractor.
The calculation results shall be less than or equal to the values from the technical specifications.
48
ALPINA / SAMBA F
�� × �� + ��
(
��
�� =
��������.
�� × �� − ��
��
�� =
�� ������.
�� × �� + ��
(
��
�� =
�� ����������.
) has a weight less than the minimum front load required, increase the machine
P
��
��
) has a weight less than the minimum rear load required, increase the machine
T
�� = ��
�� ����������.
Actual calculated
value
≤
≤
≤
TRACTOR FRONT DISC MOWER
: – with the machine attached to the front
P min
− �� × �� + 0,2 × �� × ��
)
��
�� + ��
: – with the machine attached to the front
T min
× �� + 0,45 × �� × ��
��
�� + �� + ��
:
P rzecz.
+ �� × �� − �� ×
)
�� ��
��
= �� + �� + ��
�� ��
:
T rzecz
− ��
�� �� ����������.
Technical
specification
value
USER MANUAL
�� + ��
( )
:
C
Tire load capacity
x 2
≤
≤