USER MANUAL
TRACTOR FRONT DISC MOWER
Use lifting equipment with an SWL (safe working load) higher than the mower weight specified on
❑
the mower name plate. The SWL must be higher than the weight of the mower plus all rope / chain
slings used.
Do not use any damaged slings or cables. If they are evidently damaged, replace them.
❑
Attach the lifting sling and fixtures in a correct configuration around the centre of gravity of the
❑
machine (Table 5, Table 6).
Lift the machine with slings of a sufficient length. The length of the sling legs must be so that they
❑
do not exceed 120° when attached to the machine and the lifting equipment hook, and the sling leg
angle from the vertical must not be higher than 60°.
All folding components of the machine must be stowed and secured in their transport configuration.
❑
When loading the mower on a transport vehicle, no bystanders are allowed within the working range
❑
of the lifting equipment and the loading operation.
When placed on the transport vehicle bed, secure the mower against shifting in transport.
❑
NOTE:
The work area and the operation therein shall be the responsibility of the
personnel who handles the mower.
ALPINA / SAMBA F
Fig. 5. Lifting sling attachment points
Fig. 6. ALPINA disc mower COG
13