Advertisement
August 2018
Figure 3-7:
2. Press F5 Tach Power from the Tachometer Setup screen.
Option
Tach Power ON
Tach Power OFF If the Emerson 430 SpeedVue switch is turned On, the Emerson 430
Note
Emerson recommends leaving the F5 Tach Power set to Off to conserve
battery power.
Tachometer Setup screen
Description
If the Emerson 430 SpeedVue switch is turned On, the laser beam stays on
continuously.
automatically turns power on for the speed measurement and turns off
after the measurement finishes.
User Guide
23
Advertisement
Need help?
Do you have a question about the SpeedVue 430 and is the answer not in the manual?
Questions and answers