Advertisement
User Guide
5. Press Enter to view the data.
The detected speed is automatically marked.
Figure 3-6:
6. Press F1 Set RPM if the speed is correct.
The correct speed displays on the Route Data Collection screen.
7. Press Enter to collect normal vibration data.
3.5
Automatically turn off the Emerson 430 SpeedVue after a
measurement
1. From the Route Data Collection screen, press ALT > F5 Tach Setup.
The Tachometer Setup screen appears.
22
Laser Speed Detection Spectrum screen
August 2018
Advertisement
Need help?
Do you have a question about the SpeedVue 430 and is the answer not in the manual?
Questions and answers