Installing The Linear Actuator Onto A Mechanical Mounting And Connecting It To The Protective Earth Conductor - PI N-­472 10 Series User Manual

5 Installation
NOTICE
Damage to the fine­thread screw from contact with hard objects!
Contact with hard objects can damage the thread of the fine-thread screw. A damaged thread
can lead to the failure of the linear actuator.
 Prevent the fine-thread screw from coming into contact with hard objects.
NOTICE
Damage from overtightening the mounting nut!
Overtightening the mounting nut can damage the linear actuator.
 Hand-tighten the mounting nut.
5.2 Installing the Linear Actuator onto a Mechanical Mounting and
Connecting it to the Protective Earth Conductor
INFORMATION
The contact of the N-472 to the protective earth conductor is established via the contact of the
mounting nut or thread or clamping shank to a sufficiently conductive mechanical mounting.
The mechanical mounting must be connected to the protective earth conductor.
INFORMATION
 Observe the applicable standards for mounting the protective earth conductor.
N­472 Linear Drive MP144E Version: 1.0.0 19