3 Product Description
3.5
Suitable Controllers
Item ID
E-871.1A1
3.6
Technical Features
ID chip
An ID chip is in the sensor connector of the linear actuator, in which the data on the linear
actuator is stored (e.g., linear actuator type, serial number, date of manufacture, hardware
version).
When switched on or rebooted, controllers from PI read the data from the ID chip.
For more information on the ID chip recognition, see the manual of the controller used.
N472 Linear Drive
Description
Q-Motion® controller, 1 channel, USB interface
MP144E
Version: 1.0.0
13