RPN Correction Procedure
The RPN correction procedure is shown below.
RPN exists.
Press the AUTO W/B BAL switch
to the BLACK side for 10 seconds.
RPN is removed?
No
Perform RPN Adjustment.
Refer to "RPN Menu"
RPN is corrected?
Yes
Correction
OK
Knee Adjustment
Weaken Blue Knee Station effective, Blue Fringe is made inconspicuous.
Blue Fringe is the most made inconspicuous at "-4".
VCO Adjustment
The VCO Adjustment menu allows adjustment of VCO frequency.
Clock Out Select
Set the Clock Out Select to ON, master clock signal can be output to VIDEO OUT connector.
Clock Frequency
The Clock Frequency setting allows adjustment of the 27 MHz master clock frequency.
Adjusting VCO
Preparation
Connect a frequency counter to the VIDEO OUT connector.
PXW-X500
Yes
Correction
OK
No
Possibility NG under the adjacent
conditions.
Delete registrations of peripheral small
RPNs and execute re-registration.
RPN is corrected?
No
Correction is not possible.
Replace the CCD block.
Yes
Correction
OK
4-13