Mb-1210 Board - Sony PXW-X500 Service Manual

2-16.

MB-1210 Board

Preparation
1. Remove the outside panel assembly. (Refer to
2. Remove the bracket (WA) assembly. (Refer to
3. Remove the RE-326 board. (Refer to
4. Remove the AU-360 board. (Refer to
5. Remove the inside panel assembly. (Refer to
6. Remove the front assembly. (Refer to
7. Remove the DC fan (30 square). (Refer to
8. Remove the DCP-67 board. (Refer to
9. Remove the HPR-53 board. (Refer to
10. Remove the DPR-362 board. (Refer to
11. Remove the EC-82 board. (Refer to
12. Remove the duct box assembly. (Refer to
13. Remove the IO board assembly . (Refer to
14. Remove the connector box assembly. (Refer to
Procedure
1. Disconnect the harnesses and flexible flat cable.
1) Disconnect the five harnesses from the five connectors (CN5, CN10, CN12, CN14, CN19) on the MB-1210
board.
2) Disconnect the flexible flat cable from the connector (CN4) on the MB-1210 board.
Harnesses
PXW-X500
"2-2. Outside Panel
"2-6. Wi-Fi Module/SD-58
"2-7. RE-326 Board")
"2-8. AU-360 Board")
"2-3-1. Inside Panel
"2-4-1. Front Assembly")
"2-5. DC Fan (30
"2-9. DCP-67 Board")
"2-10. HPR-53 Board")
"2-11. DPR-362
"2-12. EC-82 Board")
"2-13. DC Fan (40
"2-14. IO-275 Board, DIF-232
"2-15-1. Connector Box
Harnesses
CN5
CN19
CN10
Harness
Assembly")
Board")
Assembly")
Square)")
Board")
Square)")
Board")
Assembly")
CN12
MB-1210 board
Flexible flat cable
CN4
CN14
2-66