Sony PXW-X500 Service Manual page 117

2. Remove the SW-1632 board assembly.
1) Disconnect the harness from the connector (CN104) on the AXM-52 board.
2) Remove the two screws to detach the SW-1632 board assembly.
3. Remove the SW-1632 board.
1) Disconnect the harness from the connector (CN302) on the SW-1632 board.
2) Remove the two drop protection toggle cushions.
3) Remove the two screws to detach the bracket (SW).
Harness
CN302
Bracket (SW)
PXW-X500
SW-1632 board assembly
PSW2 × 5
B2 x 5
Harness
CN104
(AMX-52 board)
Drop protection toggle cushions
SW-1632 board
2-63