2-21.
HN-415 Board
Preparation
1.
Remove the outside panel assembly. (Refer to
2.
Remove the tally cover. (Refer to
3.
Remove the handle assembly. (Refer to
Procedure
1.
Disconnect the harnesses and the fine-wire coaxial cable.
1)
Disconnect the three harnesses from the three connectors (CN2, CN3, CN7) on the HN-415 board.
2)
Disconnect the fine-wire coaxial cable from the connector (CN4) on the HN-415 board.
PXW-X500
"2-2. Outside Panel
"2-19. LED-529
Board")
"2-20. Handle
Assembly")
Assembly")
CN2
CN-3736 board
Harnesses
HN-415 board
CN3
Fine-wire coaxial cable
CN4
Harness
CN7
2-78