Sony PXW-X500 Service Manual page 148

Adjustment procedure:
1. AUTO W/B BAL switch (front panel) → BLACK
(Execute black balance auto adjustment.)
2. Make the following settings with the menu.
MENU： MAINTENANCE
PAGE： Preset White
ITEM： Color Temp <P>：3200 K
ITEM： Color Temp Balance <P>：?0
MENU： PAINT
PAGE： Switch Status
ITEM： Gamma → Off
ITEM： Detail → Off
3. Select line at the center with the waveform monitor.
4. Set the waveform monitor to the CHROMA mode.
5. Measuring equipment: Waveform monitor
Adjusting point: Make the following adjustments with the menu.
MENU： SERVICE
PAGE： CCD adjustment
ITEM： R CCD GAIN
ITEM： B CCD GAIN
Specification: Adjust the CCD gain alternately to minimize carrier leak C.
Settings after adjustment
• Make the following settings with the menu.
MENU： PAINT
PAGE： Switch Status
ITEM： Gamma → On
ITEM： Detail → On
White Shading Adjustment
The white Shading menu enables the adjustment of the horizontal and vertical Saw correction level and parabola
correction level.
PXW-X500
C C
4-6