Activation; Activate Device Locally; Activate Device Via Client Software - HIKVISION DS-KD9203-FE6 User Manual

Video Intercom Face Recognition Door Station with 4.3-inch Screen User Manual

4 Activation

4.1 Activate Device Locally

You are required to activate the device first by settings a strong password for it
before you can use the device.
Steps
1. Power on the device to enter the activation page automatically.
2. Create a password and confirm it.
3. Tap OK to activate the door station.

4.2 Activate Device via Client Software

You can only configure and operate the door station after creating a password for
the device activation.
Default parameters of door station are as follows:
• Default IP Address: 192.0.0.65.
• Default Port No.: 8000.
• Default User Name: admin.
Steps
1. Run the client software, click Maintenance and Management → Device
Management → Device to enter the page.
2. Click Online Device.
3. Select an inactivated device and click Activate.
4. Create a password, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security
system, changing the password monthly or weekly can better protect your
product.
11