HIKVISION DS-KD9203-FE6 User Manual page 38

Video Intercom Face Recognition Door Station with 4.3-inch Screen User Manual
Note
• For door station, there are 4 I/O input terminals. By default, Terminal 1 and 2
correspond to Door Status. Terminal 3 and 4 correspond to interfaces of
Door Switch.
• For door station, there are 2 I/O Output Terminals. Terminal 1 and 2
correspond to Door interfaces (NO1/COM/NC1; NO2/COM/NC2) of door
station. Door 1 is enabled by default. You can enable/disable IO Out
according to needs.
Volume Input and Output
Steps
1. Click Volume Input/Output to enter the volume input and output page.
2. Slide the slider to adjust the Volume Input and Volume Output.
3. Click Save to enable the settings.
Face and Fingerprint Settings
Steps
1. Click Face and Fingerprint to enter the settings page.
2. Configure the parameters.
3. Click Save to enable the settings.
Advertisement Settings
Steps
1. Click Advertisement to enter the settings page.
2. Select the Mode.
3. Click + to add the picture.
4. Slide to set the duration.
5. Click Save to enable the settings.
27