HIKVISION DS-KD9203-FE6 User Manual page 40

Video Intercom Face Recognition Door Station with 4.3-inch Screen User Manual
Before You Start
On the linked devices network configuration page, you can configure the network
parameters of master stations, SIP servers and management centers of the same
LAN. The devices can be linked to the door station and realize the linkage between
these devices.
Steps
1. Click Linked Network Configuration to enter linked network configuration page.
2. Enter the Master Station IP Adderss, (Main) Door Station IP Address, SIP Server
IP Address, Security Control Panel IP Address and Port No.
3. Select the main door station type from the drop-down list.
4. Click Save to enbale the settings.
Note
• After adding master station IP Address, the linkage between indoor station
and master station can be realized.
• After adding the door station IP Address, the video intercom between indoor
stations of same building can be realized.
• After adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor stations of different building, calling indoor
station from outer door station and video intercom between management
center and indoors.
• After adding management center IP Address, the events can be uploaded to
the management center.
• For indoor extension, only parameter about the main indoor station should
be configured.
Figure 6-13 Linked Device Network
29