Rigol DS1000E Series User Manual page 27

2. The horizontal
on waveform window
Turn the horizontal
will move horizontally at the same time.
Horizontal offset back to 0 shortcut key
Press the
key, this is especially helpful when the trigger point is far out of the screen and
want it to get back to the screen center immediately.
3. Press the MENU button to display the TIME menu.
To enter or exit the Delayed Scan mode, set the display to Y-T, X-Y or ROLL mode,
or reset the trigger offset.
Horizontal position control
Trig-Offset: The position of the practical trigger point relative to center of
the memory. Adjust the horizontal
point horizontally.
© 2008 RIGOL Technologies, Inc.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
knob moves displayed signal horizontally
knob to adjust trigger offset. The waveform
knob to set the horizontal offset to 0 as a shortcut
User's Guide for DS1000E, DS1000D Series
knob to move the trigger
RIGOL
1-17