Saving/Recalling The Verification Masks - Racal Instruments 1256 Manual

1256 User Manual
Saving/Recalling the
Verification Masks
Advanced SCPI Operations 8-20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VERIFY? (@2(0:12))
would simply return:
OK
If on the other hand, channels 3, 5 and 11 were bad, sending the
same verification command would return:
2 : 3,2 : 5
As was the case earlier, channel 11 is excluded by the mask and
will not show up in the error report. In addition, the 1256 will show
only the first ten failures it finds when a large number of channels
are specified in a query.
These commands are NOT defined in the SCPI standard. These
commands follow the syntax rules of SCPI to implement this
functionality.
All verification masks presently defined may be prepared for
storage in non-volatile
command.
All module names stored in non-volatile memory may be recalled
from non-volatile memory using the VERIFY:RECALL command.
The syntax for these commands is shown below:
[ROUTe]
:VERify
:SAVe
:RECall
These commands are NOT defined in the SCPI standard. These
commands follow the syntax rules of SCPI to implement this
functionality.
Publication No. 980855 Rev. A
memory using the
EADS North America Test and Seervices
VERIFY:SAVE