Figure 4-10, Ascii Setup Dialog Box - Racal Instruments 1256 Manual

Publication No. 980855 Rev. A
EADS North America Test and Services
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Click on ASCII Setup. HyperTerminal then displays the ASCII
Setup dialog box shown in Figure 4-10.

Figure 4-10, ASCII Setup Dialog Box

Using the mouse, check the boxes as shown in the figure. Make
sure all other boxes are unchecked. Then click on OK, taking you
back to Setting Dialog Box. Click OK again. The main
communications screen then appears as shown in Figure 4-7.
To finalize the connection, click on the Call menu, then click on
Connect.
To test the communications between the computer and the 1256,
type the following command:
*IDN?
Then press Enter. The 1256 should respond with:
Racal Instruments 1256 Switch System, 03.10
The number at the end of the response is the firmware revision
number, which may differ from what is shown above.
1256 User Manual
GPIB and RS-232 Interfaces 4-21