Racal Instruments 1256 Manual page 38

Publication No. 980855 Rev. A
EADS North America Test and Services
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1. Press the top keypad switch. This selects line 1 (top line) of
the display, as follows:
>-----SETTINGS-----<
Type: Remote
Option: Source
Status: GPIB
The selection markers ">" and "<" indicate the display line
that is currently selected.
2. Rotate the knob to the right (clockwise). The front-panel
speaker makes a clicking noise as the knob rotates. At each
click, the selected display line shows another choice. After
the first click, the display shows the following choice on line
1:
>---STORE/RECALL ---<
Type: State
Option: Defaults
Action: <select>
Note that the top line has changed, along with the related
information on lines 2, 3, and 4.
3. Rotate the knob another click to the right. The display now
shows:
>------SYSTEM------<
Firmware Revisions
Boot : 02.05
Flash: 02.15
1256 User Manual
NOTE:
Using the Front-Panel Controls 3-3