Racal Instruments 1256 Manual page 61

1256 User Manual
Using the Front-Panel Controls 3-26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Storing the Menu Preferences
Menu preferences include all preferences set by the user, such as
remote interface settings, display intensity, and display format. The
1256 stores all menu preferences together as a single state.
The 1256 can store one menu preference state, which is
automatically restored when the power is turned on.
After storing the switch state, the non-volatile image must be
written to non-volatile RAM. Refer to the section Updating Non-
Volatile RAM for instructions.
Storing the Power-Up Switching State
To store the current switching state as the power-up state, proceed
as follows:
1. Press the top key next to the display. Rotate the knob until the
top line reads:
>---STORE/RECALL---<
2. Select line 2 (next to the top line) by pressing the second key.
Rotate the knob until line 2 of the display reads as follows:
---STORE/RECALL---
> Type: State
Config: Defaults
Action: <select>
3. Press the third key to select line 3 of the display (option).
Rotate the knob until line 3 reads:
---STORE/RECALL---
Type: State
> Config: Powerup
Action: <select>
4. Press the fourth key to select line 4 of the display. Rotate the
knob until line 4 reads:
---STORE/RECALL---
Type: State
> Config: Powerup
< Do?: Store
Press the fourth key (bottom) to store the power-up state. Pressing
any other key cancels the change.
After storing the switch state, the non-volatile image must be
written to non-volatile RAM. Refer to the section Updating Non-
Volatile RAM for instructions.
Publication No. 980855 Rev. A
NOTE:
<
<
<
NOTE:
EADS North America Test and Services