1256 User Manual
GPIB and RS-232 Interfaces 4-18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
On the Connect Using line, select the serial port you wish to use.
This example uses Com 2. Click on OK.
HyperTerminal then displays the COM Properties dialog box
shown in Figure 4-6.
Figure 4-6, COM Properties Dialog Box
Set the baud rate to match the 1256 baud rate. Set the port for 8
data bits, no parity, one stop bit, and no flow control, as shown in
Figure 4-6.
Click on OK. HyperTerm then displays the main terminal screen as
shown in Figure 4-7.
Publication No. 980855 Rev. A
EADS North America Test and Services