Specifications - Flagro FVO-400RCBT Operating Instructions Manual

This heater is designed and approved for use as a
construction heater under CSA B140.8 Portable Oil
Fired Heaters / CSA B140.02003 Oil Burning Equipment.
We cannot anticipate every use which may be made
of our heaters. CHECK WITH YOU LOCAL FIRE
SAFETY AUTHORITY IF YOU HAVE QUESTIONS
ABOUT APPLICATIONS.
Other standards govern the use of fuel gases and heat
producing products in specific applications. Your local
authority can advise you about these.
Model .................................................................
400RCBT
Input ...................................................................
Fuel ...................................................................
Fuel Pressure .......................................................
Nozzle ................................................................
Electrical.............................................................
Ignition ................................................................
.................................................................
Air Circulation .......................................................
Fuel Consumption ...................................................
Approved ............................................................... cETLus listed

SPECIFICATIONS

- 3 -
FVO-
Range
325,000 – 390,000
No.1, No. 2,
diesel or
kerosene
170 psi
2.25 x 45B
390,000 Btu
2.00 x 60B/W
353,000 BTU
1.75 x 60B/W
325,000 BTU
120V 10.5AMP
Direct Spark
Thermostat
Control
4000 cfm
2.75 Gal/hr