Specifications - Flagro F-400T Operating Instructions Manual

This heater is designed and approved for use as a
construction heater under ANSI Z83.7 2000 and
CSA 2.14 2000 Gas Fired Construction Heaters
We cannot anticipate every use which may be made
of our heaters. CHECK WITH YOU LOCAL FIRE
SAFETY AUTHORITY IF YOU HAVE QUESTIONS
ABOUT APPLICATIONS.
Other standards govern the use of fuel gases and heat
producing products in specific applications. Your local
authority can advise you about these.
Model Number
Input
Fuel
Inlet Pressure
Ignition
Air Circulation
Fuel Consumption
Approved

SPECIFICATIONS

- F-400T
- 400,000 btuh
- Natural Gas or Propane
- Natural Gas: 3.5" W.C.
- Propane: 11" W.C.
- Direct Spark Ignition
- Thermostat Control
- 2000 cfm
- 18.5 lbs/hr
- 380 cfh
- cULus listed