Specifications - Flagro FVP-750 Operating Instructions Manual

This heater is designed and approved for use as a
construction heater under Standard ANSI Z83.7/
CGA 2.14. 2011.
We cannot anticipate every use which may be made
of our heaters. CHECK WITH YOU LOCAL FIRE
SAFETY AUTHORITY IF YOU HAVE QUESTIONS
ABOUT APPLICATIONS.
Other standards govern the use of fuel gases and heat
producing products in specific applications. Your local
authority can advise you about these.
Model .................................................................
Input ...................................................................
Fuel ...................................................................
Manifold Pressure .................................................
Maximum Inlet Pressure .......................................
Ignition ...............................................................
................................................................
Air Circulation .......................................................
Fuel Consumption ..................................................
Approved ..............................................................

SPECIFICATIONS

- 3 -
FVP-750 Propane
FVN-750 Natural Gas
750,000 btuh
FVP-750 Propane
FVN-750 Natural Gas
1.50" W.C. Propane
2.20" W.C. NG
14.0" W.C. Propane
14.0" W.C. NG
Direct Spark Ignition
Thermostat Control
7000 cfm
37 lbs/hr Propane
806 cfh NG
cETLus listed