Specifications - Flagro F-400T Operating Instructions Manual

Dual fuel construction heater

Hide thumbs Also See for F-400T:

Table of Contents

This heater is designed and approved for use as a

construction heater under ANSI Z83.7 2000 and

CSA 2.14 2000 Gas Fired Construction Heaters

We cannot anticipate every use which may be made

of our heaters. CHECK WITH YOU LOCAL FIRE

SAFETY AUTHORITY IF YOU HAVE QUESTIONS

ABOUT APPLICATIONS.

Other standards govern the use of fuel gases and heat

producing products in specific applications. Your local

authority can advise you about these.

Model ............................................................. F-400T

Input ............................................................... 400,000 btuh

Fuel ................................................................. Natural Gas or Propane

Inlet Pressure ..................................................... Natural Gas: 3.5"W.C.

.........................................................

Ignition .............................................................. Direct Spark Ignition

......................................................... Thermostat Control

Air Circulation ..................................................... 2000 cfm

Fuel Consumption ................................................ 18.5 lbs/hr

...................................................... 380 cfh

Approved ............................................................ cULus listed

SPECIFICATIONS

...... Propane: 11" W.C.

- 3 -

Table of Contents